Agan-agan yg jago soal prosesor, ane mau tanya spec prosesor ane yg udah dipake lumayan lama (setahun-an), procie E5300 dual core @ 2,60 GHz (mestinya).
Tapi belakangan ane perhatiin pas booting yg tertulis frequencynya 1,6GHz doang... ane cek di BIOSnya jg cuman 1,6GHz, apa ane kena tipu (procie warisan soalnya)? atau procienya ke-underclock gr2 mobonya jelek?
Info:
Mobo
BIOSTAR
Multiplier procienya max di x8 kalau main game (DCUO), x6 kalo iddle. Menurut om google
harusnya x13
Report
Spoiler for CPU-Z yg ane potong sebagian :
Processors
------------------------
Number of processors\t\t1
Number of threads\t\t2
APICs
-------------------------
Processor 0\t
\t-- Core 0\t
\t\t-- Thread 0\t0
\t-- Core 1\t
\t\t-- Thread 0\t1
Timers
-------------------------
\tACPI timer\t\t3.580 MHz
\tPerf timer\t\t2.539 MHz
\tSys timer\t\t1.000 KHz
Processors Information
-------------------------
Processor 1\t\t\tID = 0
\tNumber of cores\t\t2 (max 2)
\tNumber of threads\t2 (max 2)
\tName\t\t\tIntel Pentium E5300
\tCodename\t\tWolfdale
\tSpecification\t\tPentium(R) Dual-Core CPU E5300 @ 2.60GHz
\tPackage (platform ID)\tSocket 775 LGA (0x0)
\tCPUID\t\t\t6.7.A
\tExtended CPUID\t\t6.17
\tCore Stepping\t\tR0
\tTechnology\t\t45 nm
\tTDP Limit\t\t65 Watts
\tCore Speed\t\t1599.9 MHz
\tMultiplier x FSB\t8.0 x 200.0 MHz
\tRated Bus speed\t\t800.0 MHz
\tStock frequency\t\t2600 MHz
\tInstructions sets\tMMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
\tL1 Data cache\t\t2 x 32 KBytes, 8-way set associative, 64-byte line size
\tL1 Instruction cache\t2 x 32 KBytes, 8-way set associative, 64-byte line size
\tL2 cache\t\t2048 KBytes, 8-way set associative, 64-byte line size
\tFID/VID Control\t\tyes
\tFID range\t\t6.0x - 13.0x
\tMax VID\t\t\t1.288 V
Chipset
---------------------
Northbridge\t\t\tIntel G41 rev. A3
Southbridge\t\t\tIntel 82801GB (ICH7/R) rev. A1
Graphic Interface\t\tPCI-Express
PCI-E Link Width\t\tx16
PCI-E Max Link Width\t\tx16
Memory Type\t\t\tDDR3
Memory Size\t\t\t4096 MBytes
Channels\t\t\tDual, (Symmetric)
Memory Frequency\t\t400.0 MHz (1:2)
CAS# latency (CL)\t\t6.0
RAS# to CAS# delay (tRCD)\t6
RAS# Precharge (tRP)\t\t6
Cycle Time (tRAS)\t\t15
Row Refresh Cycle Time (tRFC)\t64
Command Rate (CR)\t\t1T
MCHBAR I/O Base address\t\t0x0FED14000
MCHBAR I/O Size\t\t\t4096
Memory SPD
-------------------------
DIMM #\t\t\t\t1
\tSMBus address\t\t0x50
\tMemory type\t\tDDR3
\tModule format\t\tUDIMM
\tManufacturer (ID)\t (0000000000000000)
\tSize\t\t\t2048 MBytes
\tMax bandwidth\t\tPC3-10700 (667 MHz)
\tPart number\t\t
\tNumber of banks\t\t8
\tNominal Voltage\t\t1.50 Volts
\tEPP\t\t\tno
\tXMP\t\t\tno
JEDEC timings table\t\tCL-tRCD-tRP-tRAS-tRC @ frequency
\tJEDEC #1\t\t6.0-6-6-17-23 @ 457 MHz
\tJEDEC #2\t\t7.0-7-7-20-27 @ 533 MHz
\tJEDEC #3\t\t8.0-8-8-22-30 @ 609 MHz
\tJEDEC #4\t\t9.0-9-9-25-34 @ 685 MHz
DIMM #\t\t\t\t2
\tSMBus address\t\t0x52
\tMemory type\t\tDDR3
\tModule format\t\tUDIMM
\tManufacturer (ID)\t (0000000000000000)
\tSize\t\t\t2048 MBytes
\tMax bandwidth\t\tPC3-10700 (667 MHz)
\tPart number\t\t
\tNumber of banks\t\t8
\tNominal Voltage\t\t1.50 Volts
\tEPP\t\t\tno
\tXMP\t\t\tno
JEDEC timings table\t\tCL-tRCD-tRP-tRAS-tRC @ frequency
\tJEDEC #1\t\t6.0-6-6-17-23 @ 457 MHz
\tJEDEC #2\t\t7.0-7-7-20-27 @ 533 MHz
\tJEDEC #3\t\t8.0-8-8-22-30 @ 609 MHz
\tJEDEC #4\t\t9.0-9-9-25-34 @ 685 MHz
Monitoring
--------------------
Mainboard Model\t\tG41D3C (0x00000166 - 0x004E6E60)
Ada solusi buat ngembaliin ke default clock? Ane gak punya pengalaman OC, n ane periksa di BIOSnya sepertinya g ada setting buat frequency CPU. Trims sebelumnya.